Reliability

Scientific Reports volume 12, Article number: 13587 (2022) Cite this article

871 Accesses

5 Citations

Metrics details

Most existed researches consider deterministic numerical analysis when dealing with structural models. However, the test results reveal that uncertainties are existing in most cases regarding some considerations such as material randomness and the lack of experience. Therefore, proposing a probabilistic design models have got attention of researchers according to its important role in predicting accurate performance of the structures. The aim of the proposed work is to consider reliability-based analysis in numerical modelling of glulam beams reinforced with CFRP plates as well as unreinforced glulam beams by considering the properties of used timber material as random variables having mean value and standard deviation taking into consideration that the findings of this study have shown that the reliability index is worked efficiently as a limit which controls the process. Hill yield criterion model is adopted with respect to the data which is obtained from the experimental tests in order to validate the models. Furthermore, a detailed comparison between the reinforced and unreinforced glulam beams are proposed to see the effect of introducing the CFRP plates as a reinforcement material. The results of this study have successfully given a deep understanding of how the uncertainties plays a crucial role on the resulted deformations and stresses in which it was founded by making a comparison between deterministic and probabilistic numerical analysis.

Using timber as a construction material is one of the oldest techniques in structural engineering projects, especially in the case of structures carrying high self-weight since it has a relatively high strength to weight ratio, also it can be considered a highly sustainable material. During the last decades, growing interest in the application of timber in construction projects because of its ability to resist dynamic loads and its mechanical characteristics, thus many research works are involved1,2,3,4,5.

At the present time, various structural wood products are exhibiting a strong growth, glue laminated timber (Glulam) is one of those products which is considered as one of the highest performance composite construction materials6. These designed items are comprised of different layers of dimensional wood that are attached together using high strength glue material to produce a single unit. Taking into consideration that this process reduces the natural growth such as knots in the timber material7,8,9.

In fact, the topic of glulam beams has attracted many researchers in the last decades which resulted in various experimental tests on such products. In the study of Anshari et al.10, compressed wood (CW) blocks were used to strengthen the glulam beams and the specimens were tested later, the study proved that using CW as a reinforcement material is economically and environmentally effective. The feasibility of glued laminated timber beams was studied by Bourreau et al.11, the aim was to find the gluing factors which offer satisfaction behavior of glulam was done, where the results of delamination tests showed that the gluing parameters need to be adjusted depending on the wood species. Navaratnam et al.12 presented an experimental study for investigating the mechanical performance of glued-in-rod (GIR) embedded in glued-laminated timber (GLT) beam where the results of the pull-out test revealed that the failure occurred by the interface GIR to GLT slippage and shear bond delamination. An experimental study was done by Issa and Kmeid13 to reveal the influences of introducing reinforcement materials on the glued-laminated timber beams where it was found that reinforcement plays a major role in changing the failure mode from brittle to ductile and the load-carrying capacity of the reinforced beams was increased too. Another experimental study was carried out on glued laminated beams by Rescalvo et al.14, by considering carbon composites as reinforcement materials in which the study concluded that the type and the position of reinforcement directly affect the mechanical behavior of the entire element. Morin-Bernard et al.15 investigated the effects of the finger joint profile of the laminated hardwood beams on the tensile strength and it is suggested that the investigated species could be appropriate for the manufacture of GLT with high tensile strengths.

Furthermore, since the first use of timber as construction material, there are special kinds of composite materials that have been used recently in engineering wood products for purposes of reinforcing these products such as using carbon fiber reinforced polymer (CFRP), glass fiber-reinforced polymer (GFRP) and basalt fiber reinforced polymer (BFRP)16,17,18,19,20,21,22,23,24. Nadir et al.23 presented an experimental study of using CFRP composite to strengthen laminated timber beams. For purposes of predicting timber beams’ behavior, Kim and Harries25 presented a model of timber beams strengthened with CFRP sheets. A nonlinear finite element model was proposed and validated through experimental tests of timber beams strengthened with CFRP composites by Khelifa et al.26. Also, Khelifa and Celzard27 proposed a numerical approach to emulate the flexural behavior of CFRP timber beams. By using fiber-reinforced polymer plates to reinforce glued laminated timber beams, Raftery and Harte28 proposed an experimental study to investigate the impact of fiber-reinforced polymers on glulam beams. De Jesus et al.29 proposed experimental and numerical models to investigate the impact of the CFRP on the mechanical behavior of timber beams and its contribution to the prediction of failure. By analyzing the results of the experimental test, Timbolmas et al.30 compared the results and relations of tension and compression elasticity modulus between glulam beams with and without CFRP sheets. Glišović et al.31 showed in their study that the addition of CFRP plate into glulam beams increases their load carrying capacity by performing a comparison between glulam beams reinforced with CFRP plate and unreinforced glulam beams.

According to the literature, we can say that there are several advantages of using CFRP in the case of strengthening timber. CFRP is durable, easily stick to timber and they are low-density materials. Besides, when they are used on the tension side of timber element, a significant amount of tensile stress is transferred from timber under bending which is allowing the timber compression side to yield32.

To fulfill the fundamental goal of structural engineering of proposing a structure that satisfies the conditions of serviceability and safety with sensible cost, the designer should deal with the uncertainties which might be related to applied loads and material properties33,34. Thus, reliability-based design approaches have been introduced into deterministic designs of timber structures35,36,37,38. Bui et al.39 investigated the effect of vibration frequencies randomness for engineered wood products by adopting Monte Carlo Simulation. A probabilistic glulam model was proposed by Kandler and Füssl40 considering random stiffness for each lamination case. Also, Kandler et al.41 investigated the effect of considering random stiffness fluctuations on the performance of glulam. Load bearing capacity of glulam beams was considered to propose a probabilistic technique through Monte Carlo simulation in the study of Frink et al.42.

This study aims to explore the effect of introducing reliability-based design on the numerical analysis of reinforced glulam beams with CFRP plate and unreinforced glulam beams. In addition, four-point bending tests of the two considered beams models are considered and the results of these tests are discussed. To seek the expected goal, a written code is made to do the probabilistic analysis by assuming that the introduced reliability index plays as a bound when the timber properties are considered randomly. Moreover, Monte Carlo technique is utilized for purposes of determining reliability indices according to the statistics of the parameters of timber properties.

Timber as a construction material has several characteristics that make it a proper choice for the construction of buildings. In fact, it is very anisotropic with various properties in different directions due to its formulation of oriented fibers. Also, when compression is parallelly applied to the grain, it generates stress which deforms the cells about their longitudinal axis. Hill yield criterion is applied for purposes of modeling timber since the timber is considered an elastic perfectly plastic material. The theory relies on the idea of a generalization of the Huber–Mises–Hencky in which there is an allowed connection between the material strength and the anisotropic directions. In case of utilizing this criterion with taking into consideration the isotropic hardening choice, the yielding formulation is given by43:

where \(\sigma \) is the stress state, \({\left(\sigma \right)}^{T}\) represents the transpose of stress state, [M] is the mass matrix, \({\sigma }_{0}\) stands for the reference yield stress, and \({\overline{\varepsilon }}^{p}\) represents the equivalent plastic strain. However, in case of considering it with the kinematic hardening choice, the yielding formulation is expressed by:

where α represents the vector of yield surface translation. The Hill yield stress potential of a coordinate system accompanying with anisotropy system is expressed as:

where \(N,M,F,H,L\) and \(G\) are coefficients which are determined according to the material properties in several orientations.

where Ri:j stands for the anisotropic yield stress ratios.

In addition, processed wood, fiber composites, titanium alloys and zirconium alloys also can be modeled by adopting this criterion.

In this study, the reliability-based design is utilized by calling the primary idea of reliability analysis. The failure criteria can be estimated by \({X}_{R} \le {X}_{S}\) in which \({X}_{R}\) stands for the non-negative limit for \({X}_{S}\) considering that \({X}_{S}\) and \({X}_{R}\) are two independent random variables with probabilistic density functions \({f}_{R} ({X}_{S})\) and \({f}_{R} ({X}_{R} )\), respectively. Accordingly, Eq. (10) is used to estimate the probability of failure (\({P}_{f}\))44.

An alternative definition can be used for the previous equation in which it is defined in the matter of the limit state function:

where \(g \le 0\) characterizes the domain of failure \({D}_{f}\). Thus, to obtain \({P}_{f},\) the following expression is used:

In addition, \({P}_{f}\) could be written as:

A mathematical technique which is called Monte Carlo method is used in this study for the purposes of estimating the \({P}_{f}\). The primary idea of this method implicates the generating \(x\) of the random vector \(X\) based on the probability joint density function \({f}_{X}(x)\). According to the Monte-Carlo technique, the \({P}_{f}\) can be estimated as the ratio of points number within the failure domain to the total generated points number. The formulation which is used to express this hypothesis can be written by utilizing the indicator function of \({D}_{f}\) as:

Thus, \({P}_{f}\) formula can be reconstructed as:

Therefore, the two points distribution of the random variable \({\chi }_{{D}_{f}}\left(X\right)\):

where \({P}_{f}={\mathbb{P}}[X\in {D}_{f }]\). Considering that \({\chi }_{{D}_{f}}\left(X\right)\) is associated with mean value and variance which are determined by:

In Monte Carlo technique, an estimator of the mean value to determine \({P}_{f}\) is expressed as follow:

where \({X}^{(z)}\) represents independent random vectors (where \(z=1,\dots ,Z\)) which are associated with probability density functions. For purposes of considering uncertainties, the material properties of timber beams are considered as random variables in which following Gaussian distribution with mean value \({\mathbb{E}}\) and variance \({\mathbb{V}}ar\). Consequently, the estimator's mean value and variance are calculated as:

Due to the difficulties in computing the probability of failure accurately in practical structures, first-order reliability methods are used where they utilize a measure known as reliability index which is denoted by the Greek letter beta (β)45. The advantages of using a reliability index are that as the reliability-based design has found wide applications in structural engineering, the target reliability index governs more everyday structural engineering practices and structural engineering standards offer a wide range of target values (see e.g., EN199046).

The reliability bound can be demonstrated by considering the reliability index \(\upbeta \) as:

Finally, in order to determine \({\upbeta }_{\mathrm{target}}\) and \({\upbeta }_{\mathrm{calc}}\), the following equations are used:

In this section, two experiments are considered in which the first one examines the unreinforced glulam beams while the second experiment represents the test of glulam beams which is reinforced by CFRP plate. The beams are tested by utilizing four-point bending tests29. An adhesion test was performed on the timber before the beginning of the test. Moreover, a commercial glulam beams are used in which the properties are illustrated by the producer. The considered properties of the used materials in this study are concluded in Table 1, where fm,k is characteristic bending strength, fc,0,k represents characteristic compression strength parallel the grain, fc,90,k stands for characteristic compression strength perpendicular to the grain, ft,0,k is characteristic tension strength parallel the grain, ft,90,k represents characteristic tension strength perpendicular to the grain, fv,k is characteristic shear strength, E0,mean stands for mean of parallel the grain elastic modulus, and E90,mean is mean of perpendicular to grain elastic modulus.

Six glulam beams were considered for the experimental tests, three of them were considered as unreinforced glulam beams each of them consisted of six layers, each layer was \(40 \mathrm{mm}\) height. Thus, the geometry of single beam was \(2500 \mathrm{mm}\) length and a cross-sectional area of \(\left(100 \mathrm{mm} \times 240 \mathrm{mm}\right)\). The other three glulam beams which were considered for reinforcement had the same geometry, but pultruded CFRP plate was chosen as reinforcement material with dimensions of \(2500 \mathrm{mm}\) in length, \(100 \mathrm{mm}\) of width and \(1.2 \mathrm{mm}\) thickness (Sika CarboDur S-1012). To verify its tensile strength and elastic modulus, the CFRP plate was tested in tension according to Ref.47. Tensile strength of 3100 MPa and a modulus of elasticity in the tension of 170,000 MPa were determined and confirmed by the manufacturer in the technical data report48. Besides, adhesives SIKA products were used to glue the CFRP plate. The schematic layout of the laboratory tests of unreinforced and reinforced glulam beams are illustrated in Figs. 2 and 6, respectively.

In this section, FEA is proposed to model the nonlinear behavior of both reinforced and unreinforced glulam beams by using FEA software ABAQUS49.

The unreinforced glulam beam is modelled by using C3D8 elements which are an eight-node brick elements as can be seen in Fig. 1. As lamellas are glued together, a perfect bond is assumed between these lamellas, and it was not considered in the model due to its small thickness. It is worth mentioning that for purposes of distinguishing between the compressive strength and tensile strength, a theoretical separation was proposed of compression and tension zones50,51. Besides, steel bearing plates are used at loading points in order to prevent the model from local failure and the dimensions of these plates are length \(=150 \mathrm{mm}\), thickness = \(30 \mathrm{mm}\) and width = \(100 \mathrm{mm}\).

Eight-node brick element.

The geometry and the boundary conditions of the considered beams are presented in Fig. 2. Taking into consideration that because of symmetry, only the half of the beam is considered for the modelling. Besides, it should be noted that coupling effect are considered to distribute the loads on the plates.

Geometry and the boundary conditions of the unreinforced glulam beam.

Figure 3 represents the glulam model in ABAQUS, only half of the beam is considered while the deleted parts are replaced with proper symmetry constraints where approximately \(32,000\) elements are used to generate a fine mesh of this half to produce accurate results.

Unreinforced glulam numerical model: (a) Assembly of the model (b) Finite element mesh of the model.

The considered material properties of the model in FEA are shown in Tables 2 and 3 for compression and tension, respectively.

Figure 4 represents a comparison between the validated model and the average experimental tests according to the obtained displacement at the middle of the models. In addition, tensile failure of unreinforced glulam beams is shown in Fig. 5 where the failure occurred within the region of maximum bending between the two acting loads where the tensile stresses exceed the yield strength. Taking into consideration that the adhesion between the laminates of the timber did not fail.

Force–displacement diagrams of the unreinforced glulam.

Failure mechanism of unreinforced beams.

The modelling of the glulam beam in this section is the same as what we did in the previous section but with difference which is represented in the introducing of the Sika CarboDur \(\mathrm{S}-1012\) CFRP laminate with dimensions of length \(=2500 \; \mathrm{ mm},\) width \(=100 \; \mathrm{ mm}\) and thickness \(=1.2 \; \mathrm{ mm}\) for the reinforcement of the glulam beams and Fig. 6 illustrates the geometry of the considered model. Also, just the half of the model is considered with FE mesh of \(36,000\) elements.

Geometry and the boundary conditions of the reinforced glulam beam.

The material properties of the considered model are the same as those which are shown in Tables 2 and 3. Besides, Fig. 7 shows the maximum obtained deflection at the middle point of the validated model in comparison to the average experimental tests. The force–displacement behavior was linear-elastic until the occurrence of the local fractures within tension zone. As compressive timber yielded, a nonlinear response was generated in which a sudden drop of load as a result of tensile failure in timber have been occurred as shown in Fig. 8. Besides, it is worth noting that there was no failure occurred within the CFRP plate.

Force–displacement diagrams of the reinforced glulam.

Failure mechanism of reinforced glulam beams.

In this section, a discussion about the obtained results of the unreinforced glulam beam and reinforced glulam beam with CFRP plate is considered as well as a detailed comparison between these results is taken into consideration too. As what was previously mentioned, the FEA software ABAQUS is used to validate the numerical models according to the collected data of the experimental tests. Then, a written code is made to do the probabilistic analysis by assuming that the introduced reliability index plays as a bound when the timber properties are considered as random variables with mean value and standard deviation. For purposes of calculating the reliability indices, Monte Carlo technique is adopted by assuming the total sample point number (Z = 3 × 106). Furthermore, the assumed random variables of the timber material are shown in Table 4, taking into consideration that the corresponding parameters are changed accordingly.

Three different results of the unreinforced glulam beam analysis are considered according to three different reliability index \((\upbeta )\) values which are shown in Table 5. It can be noticed that by introducing \(\upbeta \), it has worked as a bound in which the changing of timber properties changes the load \((\mathrm{F})\) and corresponding displacement \((\mathrm{U})\). The displacement values are decreased by \(5.64\mathrm{\%}\) from \(23.39 \; \mathrm{ mm}\) in case of \(\upbeta =3.32\) to \(22.07\) \(\mathrm{mm}\) when \(\upbeta =4.83.\) Besides, considering low values of \(\upbeta \) will involve greater loads, consequently greater values of displacements will be resulted also. So, supposing that the randomness of timber properties will lead to producing random properties per each iteration, thus this explains how uncertainty's part is adapted in this study.

Additionally, the probabilistic nature of timber properties which was represented in Table 6, indicated that introducing the standard deviation on these values changed the results accordingly where the material properties are straightforwardly influencing load \((\mathrm{F})\) and corresponding displacement \((\mathrm{U})\) values regarding the resulted \(\upbeta \) values.

Due to symmetry, only half of the beam was considered to show the result of numerical analysis. The patterns of normal and shear stress distribution which are resulted from the probabilistic numerical analysis within the model are shown in Figs. 9, 10 and 11. Besides, Table 6 represents the corresponding mean von mises stresses, load, and displacement values in the probabilistic design for each value of \(\upbeta \). The value of mean von mises stress is decreased by \(4.75\mathrm{\%}\) from \(12.64 \; \mathrm{ MPa}\) in case of \(\upbeta =3.32\) to \(12.04 \; \mathrm{ MPa}\) when \(\upbeta =4.83\), thus we can say that as \(\upbeta \) increases the mean von mises stress decreases.

Stress distributions \((\mathrm{MPa})\) in the unreinforced glulam beam in case of \(\upbeta =4.83\) (a) Normal stress \({\upsigma }_{11}\) (b) Shear stress \({\upsigma }_{12}\).

Stress distributions \((\mathrm{MPa})\) in the unreinforced glulam beam in case of \(\upbeta =4.28\) (a) Normal stress \({\upsigma }_{11}\) (b) Shear stress \({\upsigma }_{12}\).

Stress distributions \((\mathrm{MPa})\) in the unreinforced glulam beam in case of \(\upbeta =3.32\) (a) Normal stress \({\upsigma }_{11}\) (b) Shear stress \({\upsigma }_{12}\).

On the other hand, the patterns of normal and shear stresses distribution in which are resulted from the deterministic numerical analysis within the model are presented in Fig. 12. Also, Table 7 represents the corresponding mean von mises stresses, load and displacement values in case of deterministic analysis.

Stress distributions \((\mathrm{MPa})\) in the unreinforced glulam beam in case of deterministic analysis (a) Normal stress \({\upsigma }_{11}\) (b) Shear stress \({\upsigma }_{12}\).

The value of mean von mises stress in the case of deterministic design is higher than what is obtained in the probabilistic design, thus we can understand that \(\upbeta \) is working as a limit for producing safe design.

The glulam beam with CFRP plate reinforcement is considered for the probabilistic analysis in this section, the obtained results corresponding to various \(\upbeta \) values are shown in Table 8. By considering the reliability index, the corresponding load \((\mathrm{F})\) and displacement \((\mathrm{U})\) values are changed as the timber material properties are changed. For instance, the displacement values are decreased by \(7.86\mathrm{\%}\) from \(23.67\mathrm{ mm}\) in case of \(\upbeta =3.32\) to \(21.81\) \(\mathrm{mm}\) when \(\upbeta =4.83.\) Thus, again here we can say that the reliability index can be considered as a constraint in which new results are generated accordingly.

Similar to the findings of the previous problem, we can say here also that considering random variables of timber properties explains how the effect of introducing the \(5\mathrm{\%}\) standard deviation is on these values changes the results accordingly where the material properties are straightforwardly influencing load \((\mathrm{F})\) and corresponding displacement \((\mathrm{U})\) values regarding to the obtained \(\upbeta \) values.

The distribution of normal and shear stresses in which are resulted from the probabilistic numerical analysis of the reinforced glulam beam are presented in Figs. 13, 14 and 15. Taking into consideration that because of the symmetry of the beams, only the half of the beam was considered to express the result of analysis. Besides, Table 9 represents the corresponding mean von mises stresses, load and displacement values in the probabilistic design for each value of \(\upbeta \). The value of mean von mises stress is decreased by \(6.77\mathrm{\%}\) from \(12.71 \; \mathrm{ MPa}\) in case of \(\upbeta =3.32\) to \(11.85 \; \mathrm{ MPa}\) when \(\upbeta =4.83\), thus we can say that the mean von mises stress decreases as \(\upbeta \) increases.

Stress distributions \((\mathrm{MPa})\) in the reinforced glulam beam in case of \(\upbeta =4.83\) (a) Normal stress \({\upsigma }_{11}\) (b) Shear stress \({\upsigma }_{12}\).

Stress distributions \((\mathrm{MPa})\) in the reinforced glulam beam in case of \(\upbeta =4.28\) (a) Normal stress \({\upsigma }_{11}\) (b) Shear stress \({\upsigma }_{12}\).

Stress distributions \((\mathrm{MPa})\) in the reinforced glulam beam in case of \(\upbeta =3.32\) (a) Normal stress \({\upsigma }_{11}\) (b) Shear stress \({\upsigma }_{12}\).

While Fig. 16 shows the normal and shear stresses distribution which are resulted from the deterministic numerical analysis of the reinforced glulam beam. Moreover, the corresponding mean von mises stresses, load and displacement values in case of deterministic analysis are presented in Table 10.

Stress distributions \((\mathrm{MPa})\) of the reinforced glulam beam in case of deterministic analysis (a) Normal stress \({\upsigma }_{11}\) (b) Shear stress \({\upsigma }_{12}\).

In case of deterministic design , we can say that the calculated value of mean von mises stress is much higher than which is obtained from the probabilistic design. Therefore, \(\upbeta \) efficiently works as a bound in order to produce safe design controlling the yielding state of the model.

In this section, different comparisons between the obtained results of unreinforced glulam and reinforced glulam with CFRP are considered in order to show the effect of considering the CFRP plate as reinforcement material in case of probabilistic designs.

A comparison between the obtained displacement of the two considered models according to different values of \(\upbeta \) is represented in Fig. 17a. The displacement value is decreased by \(1.17\mathrm{\%}\) from \(22.07 \; \mathrm{ mm}\) in case of unreinforced glulam model to \(21.81 \; \mathrm{ mm}\) in case of reinforced glulam model considering \(\upbeta =4.83\). Besides, in case of \(\upbeta =4.28\), displacement value is decreased by \(4.58\mathrm{\%}\) from \(23.16 \; \mathrm{ mm}\) in case of unreinforced glulam model to \(22.1 \; \mathrm{ mm}\) in case of reinforced glulam model. Another comparison is made according to the obtained applied load values of the two considered models according to different values of \(\upbeta \) is shown in Fig. 17b. The applied load value is increased by \(20\mathrm{\%}\) in case of \(\upbeta =4.83\) from \(88 \; \mathrm{ kN}\) in case of unreinforced glulam model to \(110 \; \mathrm{ kN}\) in case of reinforced glulam model. While the load value is increased by \(22.41\mathrm{\%}\) in case of \(\upbeta =4.83\) from \(90 \; \mathrm{ kN}\) in case of unreinforced glulam model to \(116 \; \mathrm{ kN}\) in case of reinforced glulam model.

Obtained displacement and load values of the considered models.

Also, a comparison is performed between the mean von mises stress values of the two considered models according to \(\upbeta \) value which is seen in Fig. 18. It can be noticed that the mean von mises stress value is increased by \(2.37\mathrm{\%}\) in case of \(\upbeta =4.28\) from \(12.35 \; \mathrm{ MPa}\) in case of unreinforced glulam model to \(12.65\) \(\mathrm{MPa}\) in case of reinforced glulam model. While the obtained mean von mises stress values are increased by \(0.55\mathrm{\%}\) in case of \(\upbeta =3.32\) from \(12.64 \; \mathrm{ MPa}\) in case of unreinforced glulam model to \(12.71 \; \mathrm{ MPa}\) in case of reinforced glulam model.

Mean von mises stress values of the considered models.

In this study, probabilistic nonlinear finite element models were considered for analyzing reinforced glulam beams with CFRP plates and unreinforced glulam beams. Hill's yield criterion model is utilized to validate the numerical model in which the results of experimental tests approved the numerical predictions. Furthermore, a written code including the adoption of reliability index as a factor that controls the analysis bound is utilized in which the timber properties are considered as random variables following a normal distribution with mean value and standard deviation.

Thus, as per what have been mentioned already, the concluded key points are:

In both models, it was noticed that considering \(\upbeta \) has influenced the results of corresponding loads \((\mathrm{F})\) and displacements \((\mathrm{U})\).

For each model, the results show that as \(\upbeta \) declines, the corresponding values of mean von mises stress increase.

Due to the probabilistic nature of timber properties, the load \((\mathrm{F})\) and displacement \((\mathrm{U})\) values were directly affected for both cases of reinforced and unreinforced models.

The pattern of normal stress distributions was less intensive in the case of probabilistic analysis than in the case of deterministic analysis, thus it can be said that \(\upbeta \) works as a controlling limit that produces a safe design.

The effects of considering the CFRP plate as reinforcement material of the glulam beams were noticeable according to the obtained results which are related to load \((\mathrm{F})\), displacement \((\mathrm{U})\) and mean von mises stress values for deterministic and probabilistic designs.

There is a quite well match between the numerically obtained force–deflection diagrams with experimentally obtained diagrams. Consequently, the model can predict the nonlinear behavior of the unreinforced and the reinforced beams.

It was approved that numerical modeling is effective in the bending behavior analysis of both unreinforced and reinforced beams, thus saving expected resources for experimental tests.

The work presented in this paper can be seen as a significant development into a more reasonable framework for the nonlinear probabilistic analysis of the reinforced glulam beams with CFRP plates. However, additional examinations and research works are supposed to consolidate other nonlinear issues such as fatigue damage and fracture.

The whole datasets which are generated during and analyzed during the current study are available in the main manuscript.

Ramage, M. H. et al. The wood from the trees: The use of timber in construction. Renew. Sustain. Energy Rev. 68, 333–359. https://doi.org/10.1016/j.rser.2016.09.107 (2017).

Article Google Scholar

de Lindt, J. W., Pei, S., Pryor, S. E., Shimizu, H. & Isoda, H. Experimental seismic response of a full-scale six-story light-frame wood building. J. Struct. Eng. 136, 1262–1272. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000222 (2010).

Article Google Scholar

Ceccotti, A. et al. SOFIE project—3D shaking table test on a seven-storey full-scale cross-laminated timber building. Earthq. Eng. Struct. Dyn. 42, 2003–2021. https://doi.org/10.1002/eqe.2309 (2013).

Article Google Scholar

Herzog, T., Natterer, J., Schweitzer, R., Volz, M. & Winter, W. Timber Construction Manual (Walter de Gruyter, 2012) https://doi.org/10.1002/9781118279687.

Monahan, J. & Powell, J. C. An embodied carbon and energy analysis of modern methods of construction in housing: A case study using a lifecycle assessment framework. Energy Build. 43, 179–188. https://doi.org/10.1016/j.enbuild.2010.09.005 (2011).

Article Google Scholar

Yadav, R. & Kumar, J. Engineered wood products as a sustainable construction material: A review. Eng. Wood Prod. Constr. https://doi.org/10.5772/INTECHOPEN.99597 (2021).

Article Google Scholar

Dietsch, P. & Tannert, T. Assessing the integrity of glued-laminated timber elements. Constr. Build. Mater. 101, 1259–1270. https://doi.org/10.1016/j.conbuildmat.2015.06.064 (2015).

Article Google Scholar

Frangi, A., Fontana, M. & Mischler, A. Shear behaviour of bond lines in glued laminated timber beams at high temperatures. Wood Sci. Technol. 38, 119–126. https://doi.org/10.1007/s00226-004-0223-y (2004).

Article CAS Google Scholar

Falk, R. H. & Colling, F. Laminating effects in glued-laminated timber beams. J. Struct. Eng. 121, 1857–1863. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:12(1857) (1995).

Article Google Scholar

Anshari, B., Guan, Z. W., Kitamori, A., Jung, K. & Komatsu, K. Structural behaviour of glued laminated timber beams pre-stressed by compressed wood. Constr. Build. Mater. 29, 24–32. https://doi.org/10.1016/j.conbuildmat.2011.10.002 (2012).

Article Google Scholar

Bourreau, D., Aimene, Y., Beauchêne, J. & Thibaut, B. Feasibility of glued laminated timber beams with tropical hardwoods. Eur. J. Wood Wood Prod. 71, 653–662. https://doi.org/10.1007/s00107-013-0721-4 (2013).

Article CAS Google Scholar

Navaratnam, S., Thamboo, J., Ponnampalam, T., Venkatesan, S. & Chong, K. B. Mechanical performance of glued-in rod glulam beam to column moment connection: An experimental study. J. Build. Eng. 50, 104131. https://doi.org/10.1016/j.jobe.2022.104131 (2022).

Article Google Scholar

Issa, C. A. & Kmeid, Z. Advanced wood engineering: Glulam beams. Constr. Build. Mater. 19, 99–106. https://doi.org/10.1016/j.conbuildmat.2004.05.013 (2005).

Article Google Scholar

Rescalvo, F. J., Timbolmas, C., Bravo, R., Valverde-Palacios, I. & Gallego, A. Improving ductility and bending features of poplar glued laminated beams by means of embedded carbon material. Constr. Build. Mater. 304, 124469. https://doi.org/10.1016/J.CONBUILDMAT.2021.124469 (2021).

Article CAS Google Scholar

Morin-Bernard, A., Blanchet, P., Dagenais, C. & Achim, A. Glued-laminated timber from northern hardwoods: Effect of finger-joint profile on lamellae tensile strength. Constr. Build. Mater. 271, 121591. https://doi.org/10.1016/J.CONBUILDMAT.2020.121591 (2021).

Article Google Scholar

Halicka, A. & Ślósarz, S. Strengthening of timber beams with pretensioned CFRP strips. Structures 34, 2912–2921. https://doi.org/10.1016/J.ISTRUC.2021.09.055 (2021).

Article Google Scholar

Zhang, C., Chun, Q., Wang, H., Lin, Y. & Shi, J. Experimental study on the flexural behaviour of timber beams strengthened with high ductility and low cost hybrid fibre sheets. Constr. Build. Mater. 322, 126514. https://doi.org/10.1016/J.CONBUILDMAT.2022.126514 (2022).

Article CAS Google Scholar

Andor, K., Lengyel, A., Polgár, R., Fodor, T. & Karácsonyi, Z. Experimental and statistical analysis of spruce timber beams reinforced with CFRP fabric. Constr. Build. Mater. 99, 200–207. https://doi.org/10.1016/J.CONBUILDMAT.2015.09.026 (2015).

Article Google Scholar

Li, Y. F., Xie, Y. M. & Tsai, M. J. Enhancement of the flexural performance of retrofitted wood beams using CFRP composite sheets. Constr. Build. Mater. 23, 411–422. https://doi.org/10.1016/J.CONBUILDMAT.2007.11.005 (2009).

Article Google Scholar

Ghazijahani, T. G., Jiao, H. & Holloway, D. Composite timber beams strengthened by steel and CFRP. J. Compos. Constr. 21, 04016059. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000714 (2017).

Article Google Scholar

İşleyen, Ü. K., Ghoroubi, R., Mercimek, Ö., Anil, Ö. & Erdem, R. T. Behavior of glulam timber beam strengthened with carbon fiber reinforced polymer strip for flexural loading. J. Reinf. Plast. Compos. 40, 665–685. https://doi.org/10.1177/0731684421997924 (2021).

Article CAS Google Scholar

Liu, Q., Ma, S. & Han, X. Study on the flexural behavior of poplar beams externally strengthened by BFRP strips. J. Wood Sci. 66, 1–13. https://doi.org/10.1186/S10086-020-01887-Y/FIGURES/14 (2020).

Article ADS Google Scholar

Nadir, Y., Nagarajan, P., Ameen, M. & Arif, M. M. Flexural stiffness and strength enhancement of horizontally glued laminated wood beams with GFRP and CFRP composite sheets. Constr. Build. Mater. 112, 547–555. https://doi.org/10.1016/J.CONBUILDMAT.2016.02.133 (2016).

Article Google Scholar

Balmori, J. A., Basterra, L. A. & Acuña, L. Internal GFRP reinforcement of low-grade maritime pine duo timber beams. Materials (Basel) https://doi.org/10.3390/MA13030571 (2020).

Article Google Scholar

Kim, Y. J. & Harries, K. A. Modeling of timber beams strengthened with various CFRP composites. Eng. Struct. 32, 3225–3234. https://doi.org/10.1016/J.ENGSTRUCT.2010.06.011 (2010).

Article Google Scholar

Khelifa, M., Auchet, S., Méausoone, P. J. & Celzard, A. Finite element analysis of flexural strengthening of timber beams with Carbon Fibre-Reinforced Polymers. Eng. Struct. 101, 364–375. https://doi.org/10.1016/J.ENGSTRUCT.2015.07.046 (2015).

Article Google Scholar

Khelifa, M. & Celzard, A. Numerical analysis of flexural strengthening of timber beams reinforced with CFRP strips. Compos. Struct. 111, 393–400. https://doi.org/10.1016/J.COMPSTRUCT.2014.01.011 (2014).

Article Google Scholar

Raftery, G. M. & Harte, A. M. Low-grade glued laminated timber reinforced with FRP plate. Compos. B Eng. 42, 724–735. https://doi.org/10.1016/J.COMPOSITESB.2011.01.029 (2011).

Article Google Scholar

de Jesus, A. M. P., Pinto, J. M. T. & Morais, J. J. L. Analysis of solid wood beams strengthened with CFRP laminates of distinct lengths. Constr. Build. Mater. 35, 817–828. https://doi.org/10.1016/J.CONBUILDMAT.2012.04.124 (2012).

Article Google Scholar

Timbolmas, C., Bravo, R., Rescalvo, F. J. & Gallego, A. Development of an analytical model to predict the bending behavior of composite glulam beams in tension and compression. J. Build. Eng. 45, 103471. https://doi.org/10.1016/J.JOBE.2021.103471 (2022).

Article Google Scholar

Glišović, I., Pavlović, M., Stevanović, B. & Todorović, M. Numerical analysis of glulam beams reinforced with CFRP plates. J. Civ. Eng. Manag. 23, 868–879. https://doi.org/10.3846/13923730.2017.1341953 (2017).

Article Google Scholar

Saad, K. & Lengyel, A. Strengthening timber structural members with CFRP and GFRP: A state-of-the-art review. Polymers 14, 2381. https://doi.org/10.3390/POLYM14122381 (2022).

Article CAS PubMed PubMed Central Google Scholar

Habashneh, M. & Movahedi, R. M. Reliability based geometrically nonlinear bi-directional evolutionary structural optimization of elasto-plastic material. Sci. Rep. 12, 1–22. https://doi.org/10.1038/s41598-022-09612-z (2022).

Article CAS Google Scholar

Lógó, J., Rad, M. M., Knabel, J. & Tauzowski, P. Reliability based design of frames with limited residual strain energy capacity. Period. Polytech. Civ. Eng. 55, 13–20. https://doi.org/10.3311/PP.CI.2011-1.02 (2011).

Article Google Scholar

Wang, Y. T. & Foschi, R. O. Random field stiffness properties and reliability of laminated wood beams. Struct. Saf. 11, 191–202. https://doi.org/10.1016/0167-4730(92)90013-D (1992).

Article Google Scholar

Köhler, J., Sørensen, J. D. & Faber, M. H. Probabilistic modeling of timber structures. Struct. Saf. 29, 255–267. https://doi.org/10.1016/J.STRUSAFE.2006.07.007 (2007).

Article Google Scholar

First Order Reliability Design of Glulam Timber Beams with Bottom Reinforced FRP Plate | Samuel Abejide and O. Abejide—Academia.edu n.d. https://www.academia.edu/29207559/First_Order_Reliability_Design_of_Glulam_Timber_Beams_with_Bottom_Reinforced_FRP_Plate (accessed 18 Apr 2022).

Hernandez, R., Student, G., Bender, D. A., Richburg, B. A., Kline, K. S. Probabilistic modeling of glued-laminated timber beams (1992).

Bui, T. A., Lardeur, P., Oudjene, M. & Park, J. Numerical modelling of the variability of the vibration frequencies of multi-layered timber structures using the modal stability procedure. Compos. Struct. 285, 115226. https://doi.org/10.1016/J.COMPSTRUCT.2022.115226 (2022).

Article Google Scholar

Kandler, G. & Füssl, J. A probabilistic approach for the linear behaviour of glued laminated timber. Eng. Struct. 148, 673–685. https://doi.org/10.1016/J.ENGSTRUCT.2017.07.017 (2017).

Article Google Scholar

Kandler, G., Lukacevic, M., Zechmeister, C., Wolff, S. & Füssl, J. Stochastic engineering framework for timber structural elements and its application to glued laminated timber beams. Constr. Build. Mater. 190, 573–592. https://doi.org/10.1016/J.CONBUILDMAT.2018.09.129 (2018).

Article Google Scholar

Fink, G., Frangi, A. & Kohler, J. Probabilistic approach for modelling the load-bearing capacity of glued laminated timber. Eng. Struct. 100, 751–762. https://doi.org/10.1016/J.ENGSTRUCT.2015.06.015 (2015).

Article Google Scholar

Hill, R. The mathematical theory of plasticity n.d.:356.

Stanton, A., Wiegand, D., Stanton, G. Probability reliability and statistical methods in engineering design (2000).

Haldar, A., Mahadevan, S. Probability, reliability, and statistical methods in engineering design 304 (2000).

Standard, B et al. Eurocode—Basis of structural design. Eurocode 0 2002.

EN ISO 527-5:2009—Plastics—Determination of tensile properties—Part 5: Test conditions for n.d. https://standards.iteh.ai/catalog/standards/cen/a0420b42-b9a9-4311-bec7-3638d814a3e6/en-iso-527-5-2009 (accessed 23 July 2022).

Sika® CarboDur® S | Structural Strengthening n.d. https://gcc.sika.com/en/construction/refurbishment/structural-strengthening/sika-carbodur-s.html (accessed 23 July 2022).

Smith, M. ABAQUS/Standard User's Manual, Version 6.9. (Dassault Systèmes Simulia Corp, 2009).

Kawecki, B. & Podgórski, J. 3D abaqus simulation of bent softwood elements. Arch. Civ. Eng. 66, 323–337. https://doi.org/10.24425/ACE.2020.134400 (2020).

Article Google Scholar

Kawecki, B. Guidelines for FEM modelling of wood-CFRP beams using ABAQUS. Arch. Civ. Eng. 67, 175–191. https://doi.org/10.24425/ACE.2021.138493 (2021).

Article Google Scholar

Download references

Open access funding provided by Széchenyi István University (SZE).

Department of Structural and Geotechnical Engineering, Széchenyi István University, Gyor, 9026, Hungary

Harrach Dániel, Muayad Habashneh & Majid Movahedi Rad

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

D.H.: experimental tests preparation, visualization, investigation, writing—original draft.M.H.: formal analysis, visualization, writing—original.M.M.R.: conceptualization, methodology, writing—original draft.All authors reviewed the manuscript.

Correspondence to Majid Movahedi Rad.

The authors declare no competing interests.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

Dániel, H., Habashneh, M. & Rad, M.M. Reliability-based numerical analysis of glulam beams reinforced by CFRP plate. Sci Rep 12, 13587 (2022). https://doi.org/10.1038/s41598-022-17751-6

Download citation

Received: 04 July 2022

Accepted: 30 July 2022

Published: 10 August 2022

DOI: https://doi.org/10.1038/s41598-022-17751-6

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.